Silk’n Motion Premium H3220 Instrucciones De Uso página 17

7. Get started
To get started:
1. Remove the device and other components from box.
2. Plug the adapter cord into the device socket (#7) and
plug the adapter into an electrical outlet. All energy level
indicator lights (#1) will turn on, and then go off.
7.1 Before your first treatment
C
Remove all jewelry before use.
You must decide which energy level is right for your skin and the
area you want to treat. The device has 5 levels of energy from 1
(the lowest) to 5 (the highest). For example, you might treat one
area at energy level 1, and another at level 4. For information on
energy levels, refer to section 6.2 Energy levels.
Spot Test
To choose the right energy level, test each treatment area
separately (refer to the skin color chart at the front of this manual).
1. Press the control button (#4) to turn on the device. The
level 1 energy level indicator light (#1) will go on.
2. Place the treatment surface (#6) on your skin to deliver
one pulse. If you did not experience abnormal discomfort
after 24 hours, increase the energy level on your next test
spot. To increase the energy level, remove the device from
your skin and press the control button (#4) again. This will
increase the energy level.
15
EN