Publicidad
Idiomas disponibles
Idiomas disponibles
Section 7 Standard operation
7.1 Use an operator ID
The operator ID tag associates measurements with an individual operator. All stored data will include
the operator ID.
To easily manage operator IDs, use the web application "tool.htm". Refer to the manufacturer's
website for more information.
1. Push Main Menu>Operator ID.
2. Select an option.
Option Description
Mode
Set the Operator ID function to on or off (default).
Select
Select an ID from a list. The current ID will be associated with sample data until a different ID is
selected. Use the UP and DOWN arrows to select an operator ID from the home screen. It is
possible to select the operator ID on the measurement screen before a Chemkey is in the slot or a
probe is attached.
Create Enter a name for a new operator ID.
Delete
Erase an existing operator ID.
7.2 Use a site ID
Select the site ID tag to associate measurements with a particular sample or with a location. If
assigned, stored data will include this ID.
To easily manage site IDs, use the web application "tool.htm". Refer to the manufacturer's website
for more information.
1. Push Main Menu>Site ID.
2. Select an option.
Option Description
Mode
Set the Site ID function to manual, auto, off or routes. Manual—Select a site ID manually. Auto—
The samples are numbered in sequence for each measurement until a different ID is selected. Off
—The site ID function is set to off (default). Routes—Supplies an ordered subset of the complete
site ID list.
Select
Select an ID from a list. The current ID will be associated with the sample data until a different ID is
selected. Set Site ID>Show to Yes. Use the RIGHT or LEFT arrow to select the current site ID on
the measurement screen. Make sure that Site ID>Show is set to Yes and at least one Chemkey is
in the slot or one probe is attached.
Create
Add a new site ID.
Delete
Erase existing site ID(s).
Note: Make sure to select the Manual mode to delete a site ID.
Show
Shows the site ID on the measurement screen. Set to on or off.
Routes Supplies an ordered list of site IDs. If a route is selected, the site IDs automatically show on the
measurement screen and are recorded. Push the RIGHT arrow to select the next location. Use the
web application "tool.htm" to set up the routes. Refer to the manufacturer's website for more
information.
Notes
Record special information and add this information to an event log.
English 11
Publicidad
