Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 1 Product overview (SL1000 shown)
1 Mini USB port
2 Probe connector port caps
3 Probe connection ports
4 Power access port
5 Display
3.3 Product components
Make sure that all components have been received. Refer to the supplied documentation. If any
items are missing or damaged, contact the manufacturer or a sales representative immediately.
Section 4 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
4.1 Lithium battery safety
Fire and explosion hazard. Lithium batteries may get hot, explode or ignite and cause serious injury if
exposed to abuse conditions.
• Do not use the battery if there is visible damage.
• Do not use the battery after strong shock or vibration occurs.
• Do not expose the battery to fire.
• Keep the battery at temperatures less than 60 ºC (140 ºF).
• Keep the battery dry and away from water.
• Prevent contact between the positive and negative battery terminals.
• Do not let unauthorized persons touch the battery.
• Discard the battery in accordance with local, regional and national regulations.
• Do not use or store the instrument in direct sunlight, near a heat source or in high temperature
environments such as a closed vehicle in direct sunlight.
6 English
6 Keypad
7 Chemkey slot, SL250 and SL1000
8 Chemkey slots, SL1000 only
9 Sample detector
W A R N I N G
W A R N I N G
Publicidad
