Hach SL250 Manual Básico Del Usuario página 3

Table of Contents
1 Online user manual on page 3
2 Specifications on page 3
3 General information on page 4
4 Installation on page 6
5 User interface and navigation
6 Startup on page 10
Section 1 Online user manual
This Basic User Manual contains less information than the User Manual, which is available on the
manufacturer's website.
Section 2 Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Enclosure rating
Weight
Power requirements (internal)
Power requirements (external)
Operating temperature (discharging)
Charging temperature
Storage temperature
Interface
5-pin input connector
External power supply connection
Chemkey slots
Data memory
Data storage
Temperature correction (for IntelliCal
probes)
Measurement display lock (for IntelliCal
probes)
Protection class
Certifications
Warranty
on page 9
Details
13.08 x 5.89 x 25.83 cm (5.15 x 2.32 x 10.17 in.)
IP54 with caps installed for the meter probe connector ports or with the
probes connected to the instrument
SL1000: 1.2 kg (2.7 lb); SL250: 1.0 kg (2.2 lb)
Lithium-ion polymer rechargeable battery, 7.4 V, 5.0 Ah (5000 mAh)
100V–240 VAC, 50/60 Hz input, 12 V at 3.4 A output
5 to 50 °C (41 to 122 °F), maximum 85% relative humidity (non-
condensing)
5 to 45 °C (41 to 113 °F), maximum 85% relative humidity (non-
condensing)
–20 to 60 °C (–4 to 140 °F), maximum 85% relative humidity (non-
condensing)
Mini USB port
Two M12 connectors for IntelliCal probes
2.5 mm Jack
SL1000: 4; SL250: 1
1000 measured values (result, date, time, site ID, user ID)
Automatic in Press to Read measurement mode. Manual in Continuous
measurement mode
Off, automatic and manual (parameter dependent)
Press to Read and Continuous measurement mode
III
CE, UKCA, FCC, ISED, RCM, KC
1 year (EU: 2 years)
7 Standard operation on page 11
8 Calibration on page 15
9 Data log on page 16
10 Maintenance on page 17
11 Troubleshooting on page 20
12 Replacement parts and accessories on page 22
English 3