What Do You Want To Do With This Unit; Additional Features - Yamaha RX-V363 Manual De Instrucciones

Quick start guide
Notes
*1
You must connect a cable TV or a satellite tuner to this unit in
advance. See page 16 for details.
*2
You need to connect the supplied FM and AM antennas to this
unit in advance. See page 18 for details.
*3
You have to tune into the desired radio station. See page 37 to
39 for the tuning information.
*4 To achieve the best possible reception, orient the connected
AM loop antenna, or adjust the position of the end of the
indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 25 for details.
■ After using this unit...
Press A STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. To turn on this unit
from the standby mode, press A STANDBY/ON (or
A POWER). See page 19 for details.
Note
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
8
En
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
■ Using various input sources
• Basic controls of this unit
• Enjoying FM/AM radio programs
■ Using various sound features
• Using various sound field programs
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
• Manually adjusting various parameters of
this unit
• Adjusting the advanced parameters

■ Additional features

• Automatically turning off this unit
☞
P. 25
☞
P. 29
☞
P. 37
☞
P. 34
☞
P. 22
☞
P. 44
☞
P. 52
☞
P. 33