Publicidad
Sewing with the hemmer foot
GB
0
1~4
A
* The hemmer foot is an optional accessory not supplied with your
machine.
For hems in fine or sheer fabrics.
Set the machine as illustrated. Pattern selector on "A".
Neaten the edge of the fabric. At the beginning of the hem, turn
under the edge twice by about 3 mm (1/8") and sew 4-5 stitches to
secure. Pull the thread slightly towards the back. Insert the needle
into the fabric, raise the presser foot and guide the fold into the
scroll on the foot. (1)
Gently pull the fabric edge towards you and lower the presser foot.
Begin sewing, guiding the fabric into the scroll by holding it upright
and slightly to the left. (2)
1
56
https://manual-hub.com/
2
Publicidad
