Removing The Front And Rear Brake Pads; Checking The Condition Of The Brake Pads; Reinstalling The Front And Rear Brake Pads - SHERCO 125 SE/R Manual De Propietario

REMOVING THE FRONT AND REAR BRAKE PADS

1
2

CHECKING THE CONDITION OF THE BRAKE PADS

A

REINSTALLING THE FRONT AND REAR BRAKE PADS

1
- Remove the clip
- Remove the brake pads.
Do not operate the front brake lever or rear brake
pedal when the brake pads are removed.
2
1
Check the pads for wear
Minimum pad thickness
If replacement is necessary, always change
the pads in pairs.
Check that the brake discs are not contaminated
with oil or grease. In they are, clean the discs
with brake cleaner.
Brake cleaner
2
and retaining pin
1
A
Minerva brake cleaner
and degreaser
.
2
≥1mm
123