Canon imageRUNNER 1750i Guía De Funciones página 12

3
Press [On] or [Off] .
[On]: Displays an alert message when the memory consumption reaches the level to be specified in the
[Off ]: Does not display an alert message even if the available memory gets low. Press [OK] → go to step 5.
4
Press [ ] or [ ] to decide the memory consumption level for an alert
message → press [OK] .
Press [ ] to decrease the memory consumption level (minimum: 60%) or press [ ] to increase it
(maximum: 95%). Each press of [ ] or [ ] decreases or increases the level in five percent increments.
The setting values (60 to 95%) are a rough indication and do not always correspond to the actual
memory consumption; even if an alert message appears, there may be enough memory left to be
used.
10
Updates Regarding Additional Functions
next step. Press [OK] → go to the next step.