Descargar Imprimir esta página

Electrolux ENG7TE18SX Manual De Instrucciones página 9

Frigorífico-congelador

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
4. CONTROL PANEL
1
11 10
ECOMETER indicator
1
Extra Cool button / indicator
2
Fridge compartment indicator
3
Alarm indicator
4
Door open alarm indicator
5
Freezer compartment indicator
6
Extra Freeze button / indicator
7
Freezer temperature button /
8
indicator
Fridge temperature button / indicator
9
Fan button / indicator
10
ECO button
11
4.1 Switching on
Connect the mains plug to the power
socket.
To select a different set temperature,
refer to "Temperature regulation".
If
to "Troubleshooting".
4.2 Switching off
1. Press and hold the fridge
temperature button and freezer
temperature button simultaneously
for 5 seconds
The display shows blinking
2. Once the appliance is switched off,
the display reads
3. Disconnect the mains plug from the
power socket.
2
3
4 5
6
9
8
appears on the display, refer
.
.
4.3 Temperature regulation
7
The temperature range may vary
between -15°C and -24°C for freezer and
between 2°C and 8°C for fridge.
Press the temperature buttons to set the
temperature of the appliance.
The recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
You may set the recommended
temperature manually with temperature
buttons or by switching on the ECO
function. Refer to "ECO function" for
more information
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure, the
appliance goes back to the
set temperature.
4.4 Switching off the fridge
It is possible to switch off only the fridge
compartment leaving the freezer
compartment on.
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. Once the fridge compartment is
switched off, the display reads
4.5 Switching on the fridge
To switch on the fridge:
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. The fridge compartment is switched
on and the previous set temperature
is restored.
ENGLISH
9
.
.
.

Publicidad

loading