Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Requirements
In Preparation
Before cutting the opening in the countertop, verify that there will be no conflict between the rangetop
1.
chassis and anything in the cabinet below.
2.
Remove all packing material and accessories from the rangetop, and verify that all items are present before
beginning the installation.
Location Requirements
Before you begin the installation, review this section thoroughly. These dimensions must be met for safe
operation. Location of the electrical outlet and gas piping may be adjusted to meet the specified parameters.
CAUTION
The rangetop complies with the maximum allowable wood-cabinet temperature of 194 °F (90 °C).
Ensure the wall covering, countertops, and surrounding cabinets can withstand this temperature to avoid
discoloration, delamination, or melting.
Maintain These Minimum Clearances
DTT48T963_DG68-01475A-00_EN+MES+CFR.indb 11
DTT48T963_DG68-01475A-00_EN+MES+CFR.indb 11
1. Vertical to combustible surface from
rangetop grate level; if installing a
ventilation hood, check hood spec's for
minimum required clearances.
2. See Cabinet/Countertop Dimensions
-Top View.
3. This specification is not applicable for
cabinets more than a horizontal distance
of 10" (25.4 cm) from the edge of the
rangetop.
Rangetop
DTT48*963
A
48" (121.9 cm)
48" (121.9 cm)*
B
54" (137.2 cm)**
* Minimum
** Recommended
A: Rangetop cutout
B: Range hood cutout
English 11
2022-11-24 오후 12:55:19
2022-11-24 오후 12:55:19
Publicidad
