Publicidad
7. Acting upon the solution valve lever (7) open and adjust the solution
detergent flow.
The water starts to flow automatically acting upon the levers drive control (8).
On the instrument board the indicator of the solenoid valve switch (6) will turn
on. Releasing these levers, the flow will stop.
8. Acting upon the squeegee lifting lever (9) lower the squeegee.
9. Acting upon the levers drive control (8) the machine starts to move the base
starts to vibrate and the squeegee starts to dry.
10. During the first stretches check that the squeegee adjustment guarantees
a perfect drying action and that the detergent solution flow is appropriate. It
has to be sufficient to wet the floor uniformly. Always consider that the correct
quantity of solution detergent depends on type of floor, dirtiness and machine
speed.
Forward Movement
The traction of the machine is given through an electronically controlled motor.
To move the machine, switch on the key (1) and then rotate the levers drive control
(2) placed on the handle bar, in forward you obtain the forward drive, in reverse the
backwards movement is obtained. The control acts in a progressive way, therefore it
is possible to graduate the speed depending on each requirement rotating the lever
whatever it is necessary. During reverse motion the speed is reduced.
OPERATION
21
Publicidad
