Publicidad
Weekly or in case of insufficient suction, it is necessary to check that the squeegee
hose is not obstructed. To clean it, proceed as follows:
1. Take off the hose from the squeegee coupling (1) and release the guide
spring of the squeegee hose (2).
2. Wash the inside of the hose with a hose, from the squeegee hose side.
3. To reassemble the hose reverse the operations above.
Cleaning Of Solution Tank And Filter
1. Bring the machine to an appropriate place for the detergent solution draining.
2. Unscrew the solution tank cap.
3. Unscrew the cap of the exhaust filter (1) so that the detergent solution flows
out into appropriate containers.
Do not wash the hose that goes from the suction motor to the
CLEANING
recovery tank.
29
Publicidad
