Publicidad
Strictly follow manufacturer/distributor indications for the maintenance and
recharge of the batteries. All installation and maintenance operations must be
executed by specialized staff, using suitable protection accessories.
Battery Recharger
Be sure that the battery recharger is suitable for the installed batteries both for their
capacities and type (lead/acid or GEL and equivalent).
On-Board Battery Charger
The machine is equipped with the on-board battery recharger please refer to the
instructions of the manufacturer of the charger concerning the operation of the
charger.
The battery charger is connected directly to the battery poles.
During the recharging operations a device is activated which does not permit the
machine's functioning.
The main cable of the battery charger has a maximum length of two meters (6.5 ft.)
and must be connected to a single-phase socket type CEE 7/7.
Batteries Recharging
Bring the machine on a level surface.
1. Plug in batteries connector (1) placed in the rear part of the machine, to the
connector (3) of the battery recharger.
2. Proceed with the recharging, keeping the tank lifted (see under paragraph
"BATTERY INSTALLATION AND SETTING OF THE BATTERY TYPE" in "BEFORE
USE").
3. Keep the recharger connected until the indication of the end of charge is
visualized.
ASSEMBLY
11
Publicidad
