Publicidad
Batteries Disposal
It is compulsory to hand over exhaust batteries, classified as dangerous waste, to
an authorized institution according to the current laws.
Squeegee Assembly
With the squeegee support slightly lifted from the floor, slide the two stud bolts (1)
placed on the upper part of the squeegee, inside the slots on the support. Lock the
squeegee by rotating the lever (2) clockwise.
Insert the squeegee hose (3) into its coupling, respecting its position as indicated in
the figure.
Adjustment Of The Squeegee
In order to have a perfect drying result through the squeegee, the rear rubber must
have the lower bending uniformly adjusted along the full length. For the adjustment,
it is necessary to put oneself in working condition and therefore the suction motor
has to be switched on and the brushes have to function together with the detergent
solution.
The lower part of the rubber is too much bent
•Take off the pressure rotating the wing nut (4) counterclockwise.
The lower part of the rubber is not much bent
•Increase the pressure rotating the wing nut (4) clockwise.
ASSEMBLY
13
Publicidad
