Publicidad
WEEKLY MAINTENANCE
Rear Squeegee Rubber Check
Check the squeegee rubber wear and eventually turn or replace it.
For the replacement it is necessary to:
1. Lift the squeegee using the lever (1).
2. Release the hook (2) of the rubber holder blade and take the rubber off.
3. Turn the rubber to a new side or replace it.
To reassemble the squeegee reverse the operations above, inserting the rubber
on the guides and locking it with the rubber holder blade.
Squeegee Hose Cleaning
Weekly or in case of insufficient suction, it is necessary to check that the squeegee
hose is not obstructed. To clean it, proceed as follows:
1. Take off the hose from the squeegee coupling (1) and release the guide
spring of the squeegee hose (2).
2. Wash the inside of the hose with a hose, from the squeegee hose side.
3. To reassemble the hose reverse the operations above.
CLEANING
25
Publicidad
