Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
EN
Robot Sensors
Wipe robot sensors by using a soft and dry cloth, as shown in the below
figure:
Laser Distance
Sensor (LDS)
Return-to-Base Sensor
Bumper
Cliff Sensors
Note: A wet cloth can damage sensitive elements within the robot and the
base station. Please use a dry cloth for cleaning.
22
Charging Contacts and Signaling Area
Clean the charging contacts and the signaling area with a soft and dry cloth.
Auto-empty Vents
Clean the auto-empty vents of the robot and the base station with a soft
and dry cloth.
Routine Maintenance
Air Duct
If the air duct is blocked, please clean it according to the following steps.
1. Unscrew mounting screws on the air duct cover and remove the cover.
2. Check whether the air duct is blocked by foreign objects. If any, clean them.
3. Reinstall the air duct cover.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of
time, turn it off and put it away. To prevent damages from over-discharging,
charge the robot at least once every three months.
EN
23
Publicidad
