Dreame D10 Plus Gen 2 Manual De Usuario página 7

Preparing Your Home
EN
Before cleaning, please move away unstable, fragile, valuable or
dangerous items, and clean up cables, cloths, toys, hard objects and sharp
objects on the ground to avoid being entangled, scratched or knocked over
by the robot and causing losses.
Open the door of the room to be cleaned, and put the furniture in its
proper place to leave more space.
Note:
• When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
• Do not vacuum hard objects like stones, steel balls and toy parts, or sharp objects like construction waste, broken glass and nails, otherwise the ground may
10 be scratched.
Before cleaning, place a physical barrier at the edge of the stairs and
sofa to ensure the secure and smooth operations of the robot.
To prevent the robot from not recognizing areas that need to be cleaned,
do not stand in front of the robot, or in a threshold, hallway, or narrow
places.
Before Use
1. Place the Base Station and Connect to an
Electrical Outlet
Place the base station on level ground against the wall. Insert the power
cord into the base station and plug it into the socket.
Place the base station in a location that is as open as possible with a
good Wi-Fi signal.
＞0.5 m
＞0.5 m
＞1.5 m
Firmly insert the power cord
until the base station's status
indicator is solid white.
Note:
• Make sure that no objects might block the signaling area.
• Remove any objects that are closer than 1.5 m from the front and 0.5 m
from either side of the base station.
2. Remove the Protections
3. Install the Side Brush
Side Brush
Click
Side Brush Clip
Note: Install the side brush until it clicks into place.
EN
11