cecotec ENERGYSILENCE AERO 3600 INVISIBLE METALLIC STYLE Manual De Instrucciones página 51

Warning. Do not use solvents to clean the fan. Doing so may result in electric shock.
RECOMMENDATION: periodically check that the blades are securely fastened to the motor with
the screws.
5. TROUBLESHOOTING
Note that not all ceiling fans are the same (not even those that are the same model), some
move more than others.
The fact that the fan moves a couple of centimetres does not indicate that it will fall over.
Even if all blades are ballasted and grouped by weight, it is impossible to completely avoid
wobble. This is not a problem. Ceiling fans tend to move during operation.
To reduce wobble, try the following:
- Check that all of the blade mounting screws are tightened and secure.
- Fan wobble may be caused by the unevenness of the fan blades. To check the blade level,
measure the distance from each blade tip to the ceiling.
Note: if measurements are irregular: Be sure the blade mount screws are not too tight or too
loose, which may cause wobbling due to an unlevelled blade tip.
- A deformed blade can cause wobbling. Check by removing the blade and placing on a flat
surface.
- Blade tracking may be checked simply by use of a household ruler. Place the ruler vertically
against the ceiling and even with the outside leading edge of a blade. Note the distance of
the edge of a blade compared to the others. Turn the blade slowly by hand to check the
remaining blades.
- If a blade is not in alignment, the blade is either out of shape, warped or the blade screws
are not evenly tightened or either loose.
ENERGYSILENCE AERO 3600 INVISIBLE METALLIC STYLE
ENGLISH
51