ACO LipuJet P-RB Instrucciones De Empleo página 74

LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
2.4 Drainage immersion pipe assembly
2.4.1 Components
1 = Screw
2 = Spacer nut
3 = Usit ring
2.4.2 Assembly
Grease the spigot of the drainage
immersion pipe [ 5 ] and the lips of
the socket seal [ 6 ] with an acid-free
lubricant.
Push the spigot of the drainage
immersion pipe [ 5 ] into the socket seal
[ 6 ] in the top section.
74/ 454
The socket seal is already inserted in the socket in the upper section on delivery.
Heaviest single component is approx. 9 kg.
Numbers in brackets " [ ] ",
"Components".
4 = Nut
5 = Submersible outlet pipe
6 = Socket seal
Representation of the components _ Chap. 2.4.1
1
2
3
4
5
6