ACO LipuJet P-RB Instrucciones De Empleo página 80

LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
2.7.2 Position
2.7.3 Assembly
IMPORTANT Tighten the screw joints with a tightening torque of 20 N . m.
Loosen both screw joints on the upper
section, hook in the bracket [ 1 ] and
reconnect the screw joint.
80/ 454
The high-pressure pump can be
positioned to the right
the centre axis of the tank
You are free to choose the location.
However, the length of the HP hose
must be taken into account.
Weight approx. 25 kg
Numbers in brackets " [ ] ",
"Components".
or left of
.
Representation of the components _ Chap. 2.7.1