ACO LipuJet P-RB Instrucciones De Empleo página 84

LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
2.10.2 Position
IMPORTANT
The control unit should be mounted on the
upper middle section for ease of operation.
2.10.3 Assembly
Fasten the control unit [ 2 ] to the upper
middle section using the Ejot screws [ 1 ] .
Tighten the Ejot screws [ 1 ] by hand.
84/ 454
The control unit can be positioned to
the right or left
centre axis of the tank.
Assembly on the right
below.
Weight approx. 3 kg
Numbers in brackets " [ ] ",
"Components".
of the
described
Representation of the components _ Chap. 2.10.1