ACO LipuJet P-RB Instrucciones De Empleo página 75

The holes in the drainage
immersion pipe and on the upper
section are already drilled on
delivery.
Partially fasten through the open
inspection cover above the
drainage immersion pipe.
Position the spacer nut [ 2 ] between
the drainage immersion pipe [ 5 ] and
the upper section and insert the screw
[ 1 ] from the inside through the drain
immersion pipe [ 5 ] and screw it into the
spacer nut [ 2 ] as far as it will go.
Insert the Usit ring [ 3 ] over the screw
[ 1 ] on the outside of the top section,
screw on the nut [ 4 ] and tighten by
hand.
LipuJet - P -RB / - RD / - RM / - RA / - RAP
Installation
75/ 454