Electrolux KOCDH77X2 Manual De Instrucciones página 30

Components
The Food sensor does not operate.
The door gasket is damaged.
Error codes
The display shows...
00:00
If the display shows an error code that is not in this table turn the house fuse off and on to restart the appliance. If
the error code recurs contact an Authorised Service Centre.
Cleaning
Problem
There is water in the appliance cavity.
- indicator is off.
- indicator is on.
The steam cooking does not work.
The steam cooking does not work.
It takes more than three minutes to empty the water
tank or the water leaks from the steam inlet opening.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
30 ENGLISH
The plug of the Food sensor is fully inserted into the
socket.
Do not use the appliance. Contact an Authorised Serv‐
ice Centre.
Check if...
There was a power cut. Set the time of day.
Check if...
There is not too much water in the water tank.
There is enough water in the water tank. If water starts
to leak in the appliance, and the indicator is still off con‐
tact an Authorised Service Centre.
There is enough water in the tank. If the tank is full and
the indicator is still on contact an Authorised Service
Centre.
There is no lime residue in the steam inlet opening.
There is water in the water tank.
There is no lime residue in the steam inlet opening.
Clean the water tank.
.........................................
.........................................
.........................................