Introduction; Equipment; Technical Data - ESAB COOL 2 Manual De Instrucciones

US
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary welding protection and accessories.
5

INTRODUCTION

Cooling unit COOL 2 is intended for cooling water-cooled GMAW (MIG/MAG)
welding guns.
ESAB's accessories for the product can be found on page 44.
5.1

Equipment

The cooling unit is supplied with installation instructions and an instruction manual.
6

TECHNICAL DATA

Power consumption
Cooling power
Noise
(Constant sound pressure when idling)
Coolant
Coolant quantity
Maximum water flow
Max. pressure lift for torch Q
Operating temperature
Transportation temperature
Dimensions l x w x h
Weight empty
Enclosure class
The cooling unit is rated 500 A at 60% duty cycle at 77°F (25°C) ambient temperature.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
bk12da
COOL2
max
- 10 -
40 V AC / 2A, 50/60 Hz
1 kW
< 70 dB (A)
ESABs ready mixed coolant
4.5 l
1.8 l/min (0.48 gal/min)
66.7 PSI (4.6 bar)
-14° to +104°F (-10° to +40°C)
- 4° to +131°F (-20° to +55°C)
26.8 x 13 x 9.1 inch (680 x 325 x 230 mm)
33.1 lbs (15 kg)
IP23
© ESAB AB2013