Candy CNCQ2T620EX Manual Del Usuario página 24

EN
Problem
It is not cold
nside
enough i
th
e appliance.
I
t is too cold
nside th
i e appli-
ance.
Moisture forma-
tion on the inside
of the refrigerator
compartment.
Moisture accu-
mulates on the
refrigerators
outside surface
or between the
doors/door and
drawer.
24
Troubleshooting
Possible Cause
• The temperature is set too
high.
• Too warm goods has been
stored.
• Too much food has been
stored at one time.
• The goods are too close to
each other.
• A door/drawer of the appli-
ance is not tightly closed.
• The door/drawer has been
opened too frequently or
for too long.
• The temperature is set
too low.
• The climate is too warm
and toodamp.
• A door/drawer of the appli-
ance is not tightly closed.
• The door/drawer has been
opened too frequently or
for too long.
• Food containers or liquids
are left open.
• The climate is too warm
and too damp.
• The door is not closed
tightly. The cold air in the
appliance and the warm air
outside it condensates.
Possible Solution
• Reset the temperature.
• Always cool down goods be-
fore storing them.
• Always store small quantities
of food.
• Leave a gap between several
foods allowing air flowing.
• Close the door/drawer.
• Do not open the door/drawer
too frequently.
• Reset the temperature.
• Increase the temperature.
• Close the door/drawer.
• Do not open the door/drawer
too frequently.
• Let hot foods cool to room
temperature and cover foods
and liquids.
• This is normal in damp climate
and will change when the hu-
midity decreases.
• Ensure that he door/drawer is
tightly shut.