Descargar Imprimir esta página

Hach Polymetron 2582sc Instrucciones Para El Usuario página 3

Ocultar thumbs Ver también para Polymetron 2582sc:

Publicidad

Table of Contents
1 Specifications
on page 3
2 General information
on page 3
3 Modbus registers
on page 5
Section 1 Specifications
Specifications are subject to change without notice.
1.1 Dissolved oxygen sensors
Specification
Measuring range
Sensitivity
Repeatability
Detection limit
Response time
Sample temperature measurement range
1.2 Oxygen scavenger electrodes
Specification
Measuring range
Sensitivity
Repeatability
Detection limit
Response time
Sample temperature measurement range
Section 2 General information
In no event will the manufacturer be liable for damages resulting from any improper use of product or
failure to comply with the instructions in the manual. The manufacturer reserves the right to make
changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer's website.
2.1 Safety information
The manufacturer is not responsible for any damages due to misapplication or misuse of this product
including, without limitation, direct, incidental and consequential damages, and disclaims such
damages to the full extent permitted under applicable law. The user is solely responsible to identify
critical application risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.
4 Installation
5 Configuration
Details
0 to 2 ppm
< 0.5 ppb
± 0.5 ppb or ± 2% of measurement, whichever is the greater
≤ 1 ppb
1 to 40 ppb: < 30 seconds
0 to 45 °C (32 to 113 °F)
Details
0 to 500 ppb hydrazine; 0 to100 ppb carbohydrazide
< 0.2 ppb
1 ppb or ± 2% of measurement, whichever is the greater
≤ 1 ppb
< 60 seconds
5 to 45 °C (41 to 113 °F)
on page 5
on page 13
English 3

Publicidad

loading