Publicidad
2.2 Icons used in illustrations
Manufacturer
supplied parts
2.3 Product overview
The ultrapure amperometry module lets the SC4500 Controller connect to an analog sensor. The
module connects to slot 3 in the controller.
For calibration and operation of the sensor, refer to the instrument user manual and the SC
Controller documentation.
2.4 Product components
Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 1 Product components
1 Module connector
2 Ultrapure amperometry module
Section 3 Modbus registers
A list of Modbus registers is available for network communication. Refer to the manufacturer's
website for more information.
Section 4 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
User supplied parts
3 Label with wiring information
4 M16 cable gland for the
Dissolved oxygen sensor
Look
Figure
D A N G E R
Do one of these
Listen
options
1. If any items are missing or
5 M20 cable gland for the Oxygen
scavenger electrodes
English 5
Publicidad
