Publicidad
Idiomas disponibles
Idiomas disponibles
Press ON/OFF button to "OFF" position. ON lamp will flash and will go out. Circulation fan
and blower motor continue to run for approx. three (3) minutes to cool down the heater.
SECTION F:
ROUTINE MAINTENANCE
CAUTION: Be sure to turn off and unplug heater before performing any checks or cleaning.
CAUTION: Allow heater to cool completely before cleaning or maintenance.
FOR OPTIMUM HEATER PERFORMANCE, THE PARTS SHOWN BELOW SHOULD BE CLEANED REGULARLY:
1. Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2. Clean Circulation Air Filter (ONCE A WEEK)
Remove dust and/or pet hair from the cover on the back of the heater.
Use a vacuum to remove any dust or pet hair.
3. Check for Fuel Leaks (REGULARLY)
Make it a habit to check for any sign of fuel leakage along the fuel line and at all joints.
Fuel leaks may lead to risk of fire, and should be corrected immediately.
4. Check Flue Pipe Area (ONCE A MONTH)
Check the flue pipe joint to make sure connection is firm.
Use a vacuum cleaner to remove any dust or pet hair.
TURNING HEATER OFF
Circulation Air Filter
Fan cover
Louver
Louver
ENGLISH
Fuel strainer (inside)
Integral fuel strainer (inside)
Check
Check
GB
10
Publicidad
