Publicidad
Idiomas disponibles
Idiomas disponibles
Program Time Settings
1. Press the " MIN." to change minutes (changes in 15 minute increments or " HOUR" to change hours to
set the time for the program to start. The time flashes during setup.
2. Press the "SET" button to confirm the time and go to the ON and OFF Settings.
NOTE: The time settings can only be set at 15 minutes after the previous programmed time or/and 15
minutes before the next programmed time.
For example, if the P01 program is set at 7:00 and P03 program is set at 16:00, the P02 programmed time
can be set between 7:15 and 15:45. If the time selected beyond the range and press the "SET" button, an
alarm will sound and then the time that can be set will be displayed.
Also, the same time cannot be set in the example above, so you cannot have 7:00 for P01 and 7:00 for P02
on Sunday.
ON and OFF Settings
1. Press the " MIN." or " HOUR" button to choose between ON or OFF.
The word "ON" or the word "OFF" will flash during the setting depending on which is selected.
2. Press the "SET" button to confirm and go to the Temperrature Settings or Program Selection step.
See NOTES below:
NOTE: When "ON" is selected, the heater will operate at the temperature and the time selected. The
screen will go to Temperature Settings step .
NOTE: When "OFF" is selected, the weekly timer does not work for that programming number.
The screen will go to the same program number in the Program Selection step once
step once you press "SET".
Temperature Settings
1. Press the " MIN." or " HOUR" button to select the desired temperature in that program.
The temperature flashes during setup.
2. Press the "SET" button to confirm the desired temperature and it will automatically go the same
programming number in the Program selection.
2. Activate Weekly Timer Operation
If the "AUTO" button is pressed during operation (the heater is ON), the weekly programming will begin.
The word "AUTO" will appear on the screen and the heater will operate according to the programming set in
the Weekly Schedule.
If "ON" is displayed on the screen during the weekly schedule, the temperature can be changed by pressing
the " MIN." or " HOUR" buttons. This will not change the temperature set in the Weekly Schedule. Also
when the time gets to the next program number it will change automatically to the programmed temperature.
ENGLISH
GB
8
Publicidad
