Publicidad
Idiomas disponibles
Idiomas disponibles
CHILD LOCK OPERATION
The childproof lock can be used to prevent children accidentally changing the heater
settings. When the heater is burning and the childproof lock is on, the heater can only be
switched off. Other functions are blocked then. If the heater has already been switched off,
the childproof lock also prevents accidental ignition of the heater.
Press and hold the CHILD LOCK (POWER SAVER) button for more than 3 seconds to
set the child lock while in operation or not in operation. "CHILD LOCK" sign will be
shown on the display.
To release the child lock operation, press the CHILD LOCK (POWER SAVER) button for
more than 3 seconds.
WEEKLY TIMER OPERATION
1. Weekly Schedule setting
NOTE: The following Weekly Schedule is set by the factory. This programming can be changed.
Day
TIME ON/OFF SET temp. TIME ON/OFF SET temp. TIME ON/OFF SET temp. TIME ON/OFF SET temp.
MON
6:30
TUE
6:30
WED
6:30
THU
6:30
FRI
6:30
SAT
8:00
SUN
8:00
NOTE: The current time and day of the week must be set first before the Weekly schedule settings can be
changed.
NOTE: The Weekly schedule settings cannot be entered or changed while the heater is ON and in AUTO mode.
Turn "AUTO" off. It does not matter if the heater is OFF or ON to enter the Weekly schedule settings
mode, as long as the AUTO is off.
Program Selection
1. Press the "TIMER" button to enter the weekly schedule settings mode. The word "TIMER", "SUN", "P01" and
"ON" will be shown on the display.
If you press the "TIMER" button while in the weekly schedule settings mode, the word "TIMER" will
disappear from the screen and the weekly schedule settings mode will be exited. Any changes before
the "SET" button was pressed will not be saved.
If the heater is turned off during the weekly setting mode, the weekly schedule setting mode will be
exited.
2. Press the " MIN." or " HOUR" button to change the program number you wish to set or modify.
The programs range from P01 to P04 for each day of the week, starting with Sunday and ending with
Saturday (The heater has 4 programs for each day). When pressing the " MIN." button, the display will
change as follows.
"SUN P01"
NOTE: When the " HOUR" button is pressed while at the bottom of programming which is P01 on
Sunday (SUN), the program number cannot be changed. If you press the " MIN." button while on P04 on
Saturday (SAT), which is the top of the programming, the program number cannot be changed.
3. Press the "SET" button to confirm changes and to go to the Program Time Settings.
The program number is initialized by pressing and holding the "CLEAR" button for 3 seconds. It is not
GB
necessary to initialize the memory if you plan to change it.
7
P01
ON
21˚C
8:00
ON
21˚C
8:00
ON
21˚C
8:00
ON
21˚C
8:00
ON
21˚C
8:00
ON
21˚C
10:00
ON
21˚C
10:00
"SUN P02"
"SUN P03"
P02
ON
18˚C
18:00
ON
18˚C
18:00
ON
18˚C
18:00
ON
18˚C
18:00
ON
18˚C
18:00
ON
18˚C
18:00
ON
18˚C
18:00
"SUN P04"
"MON P01"
P03
ON
21˚C
22:30
ON
21˚C
22:30
ON
21˚C
22:30
ON
21˚C
22:30
ON
21˚C
22:30
ON
21˚C
23:00
ON
21˚C
23:00
"MON P02"
...
ENGLISH
P04
ON
16˚C
ON
16˚C
ON
16˚C
ON
16˚C
ON
16˚C
ON
16˚C
ON
16ºC
"SAT P04"
Publicidad
