Meaning Of The Error Codes - Gaggia Milano Anima Prestige Instrucciones De Uso

Meaning of the Error Codes

Error Problem
codes
01 The coffee grinder is
clogged.
03 - 04 A problem occurred in
the brew group.
05 A problem occurred in
the water circuit.
14 The machine is over-
heated.
The list below reports the warning icons that the display can show, their
meanings and how to solve the problem. If the indicated solutions are
ineffective because the display keeps on showing the error code icon
and the machine does not function correctly, please contact the Gaggia
customer service.
In case other error codes are shown, please take the machine to an au-
thorized after-sale service centre.
The contacts are listed in the guarantee brochure or on the www.gaggia.
com and www.gaggia.it websites.
Cause
The coffee outlet duct
is clogged.
The brew group is
dirty or it is not well
lubricated.
The brew group is not
correctly positioned.
There is air in the
water circuit.
There may be multiple
causes.
English
Possible solution
Switch off the machine using the main
power button and remove the brew
group. Clean the coffee outlet duct
thoroughly using the handle of the
measuring scoop or the handle of a
spoon. Switch on the appliance again.
Switch off the machine using the main
power button. Remove the brew group
and clean it thoroughly. (refer to the
"Cleaning the Brew Group" chapter).
Switch off the machine using the main
power button. Remove the brew group
and reinsert it again. Ensure the brew
group is in its right position before
inserting it. Refer to the "Reinserting the
Brew Group" chapter.
Remove and reinsert the tank in the
machine twice. Ensure to insert the tank
correctly in the machine. Check that
space of the water tank is clean.
If you use a "INTENZA+" filter: pull
out the filter from the water tank and
shake it to remove all air from the filter.
Reinsert the "INTENZA+" filter into the
water tank.
Switch off the machine and switch it
on again after 30 minutes. Perform this
operation 2 or 3 times.
27