Error Codes Meaning - Gaggia Milano ANIMA Manual De Instrucciones

Ocultar thumbs Ver también para ANIMA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Error Codes Meaning

Error code
Problem
01
The coffee grinder is
clogged.
03 - 04
A problem occurred in the
brew group.
05
A problem occurred in the
water circuit.
14
The machine is
overheated.
4219-465-09541 MANUAL GAG. ANIMA PLUS EN-ES-PT Rev 00.indd 25
The list below reports the error codes that the display can show, their meanings
and how to solve the problem. If the indicated solutions are ineffective because
the display keeps showing the error code icon and the machine does not function
correctly, please contact the Gaggia customer service.
In case other error codes are shown, please take the machine to an authorized
after-sale service centre.
The contacts are listed in the guarantee brochure or on the www.gaggia.com and
www.gaggia.it websites.
Cause
The coffee outlet duct
is clogged.
The brew group is dirty
or not well lubricated.
The brew group is not
positioned correctly.
There is air in the water
circuit.
There may be multiple
causes.
ENGLISH
Possible solution
Switch off the machine using the power
button and remove the brew group. Clean
the coffee outlet duct thoroughly using
the handle of the measuring scoop or the
handle of a spoon. Switch on the appliance
again.
Switch off the machine using the power
button. Remove the brew group and clean
it thoroughly. (Refer to the "Cleaning the
Brew Group" chapter)
Switch off the machine using the power
button. Remove the brew group and
reinsert it. Ensure that the brew group is in
the correct position, before inserting it turn
the machine on and off again. Refer to the
"Reinserting the Brew Group" chapter.
Remove and reinsert the tank in the
machine twice. Make sure you insert the
tank correctly in the machine. Check that
the water tank seat is clean.
If you use an "INTENZA+" filter: pull out the
filter from the water tank and shake it to
remove all air from the filter. Reinsert the
"INTENZA+" filter into the water tank.
Switch off the machine and switch it
on again after 30 minutes. Perform this
operation 2 or 3 times.
25
06/04/2022 11:13:25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Anima barista plusRi8760Sup 043

Tabla de contenido