Adjusting.the.Time.and.Date.–.First.Time.Use
The meter is preset with the time and date which may need to be adjusted to the local time zone. Setting
the correct time and date in the meter is important to review the results in memory or to download the
results to a computer.
1. Press and release
on the meter. The time and
date appear on the display.
"Set‑up" and the hour flash. If
the correct time and date are
displayed, press and hold
to exit the set‑up mode.
decrease
to turn
2. Press and release
decrease or increase the hour.
Press and hold
scroll faster.
increase
or
to
3. Press and release
the hour. The minutes flash.
or
to
15
to set