Accu-Chek Aviva Instrucciones De Uso página 68

4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable (computer) or PDA.
6. Place the meter on a flat surface. Point the 2 IR windows toward each other. They
should be 1–4 inches apart.
7. Do not move the infrared cable (computer), PDA, or meter during the transfer.
8. Follow the prompts on the software.
9. The software program may shut off the meter automatically when the data transfer
is complete. Should this occur, follow the prompts on your display.
66
NOTE
• If the data did not transfer successfully, try again. If you still have problems, contact the ACCU‑CHEK
Customer Care Service Center at 1‑800‑858‑8072.
• To make the most of the download feature, you must set the time and date in the meter correctly.
Infrared.(IR).Window