Flagging.Test.Results
If you wish, you can "flag" your test result with an asterisk
flag an event such as an after‑meal (post prandial) test, exercise, or an alternate site test result. When you
review your results in memory, this "flag" can help you remember what was different about the result.
Here is how to flag a result:
1. Perform a test.
2. With the test result on the display, and the test strip STILL IN
THE METER, press and release
appears in the lower right corner.
3. Remove and discard the used test strip.
or
once. The
to mark a special result. You might want to
47
flag