Maytag BRAVOS Serie Manual De Uso Y Cuidado página 18

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Rinse & Spin
Use this option
to get a deep rinse followed
by a high-speed
spin. The time display
will
include
an estimate
of how long it will take to fill and drain the washer.
When
to use Rinse & Spin:
For loads that need rinsing
only.
For completing
a cycle after the power
has been off.
To use or change
Rinse & Spin setting:
1.
Turn knob to RINSE & SPIN until the Rinse & Spin indicator
light glows.
2.
Press STARTI
Spin Only
Spin (billy
may help shorten
drying
times for some heavy fabrics
or special-rare
items. Spin
Only
may also be used for draining
the washer
after canceling
a cycle or completing
a cycle
after a power failure.
To use or change
Spin Only
setting:
1.
[urn
knob to SPIN ONlY
until the Spin Only
indicator
light glows.
2.
Press START.
Clean
Washer
Use the Clean Washer cycle once a month
to keep the inside of your washer
fresh and clean.
This cycle uses a higher water
level in combination
with
liquid
chlorine
bleach
to thoroughly
clean the inside
of your washing
machine.
See "Cleaning
Your Washer."
IMPORTANT:
Do not add detergent
to this cleaning
cycle.
Use only liquid
chlorine
bleach.
Do not place garments
or other items in the washer
during
the Clean Washer cycle.
Use this
cycle with
an empty
wash tub.
Modifiers
allow
you to further
customize
your cycles and save energy.
AUTO TEMP
CONTROL
(
SOIL
LEVEL
it EXTRA
HEAVY
• HEAVY
• MEDIUM
• LIGHT
b(
SPIN
SPEED
HIGH
O WARM/WARM
• MEDIUM
Q WARM/COLD
• LOW
COOL!COLD
• NO SPIN
COLD/COLD
)
WASH/RINSE
TEMP
Soil
Level
Soil level (wash time) is preset for each wash cycle. See "Preset Cycle Settings"
in "Cycles."
As
you press the Soil level
pad, the cycle time (minutes)
will increase
or decrease
in the
Estimated Time Remaining
display
and a different
wash time will appear. 1o get the minimum
wash time,
press the pad until the indicator
light next to light
illuminates.
This is the shortest
wash time available
for that cycle.
For most loads, use the time recommended
in the preset cycle settings.
For heavy soil and sturdy fabrics,
press Soil [.evel to select more wash time,
if needed.
For light soil and delicate
fabrics,
press Soil I.evel to select less wash time,
if needed.
Spin
Speed
[his washer
automatically
selects the spin speed based on the cycle selected.
The preset
speeds can be changed.
Spin speeds may vary by cycle.
Wash/Rinse
Temp
Select a water temperature
based on the type of load you are washing.
Use the warmest
wash
water safe for fabrics.
Follow
garment
label instructions.
Warm
rinses leave the loads drier and more comfortable
to handle than cold rinses. However,
warm
rinses also increase
wrinkling.
Cold rinses may help with wrinkling
and save energy.
Temperature
Guide
Wash WaterTemperature
Suggested Fabrics
Hot
Whites
and pastels
Warm
Bright colors
Cold
Colors that bleed or fade
NOTE: In wash water temperatures
colder than 60°F (15.6°C),
detergents
do not dissolve
welL
Soils may be difficult
to remove.
Auto Temp
Control
Auto ]emp
Control
(ATC) electronically
senses and maintains
a uniform
wash and rinse water
temperature.
ATC regulates
incoming
hot and cold water. The ATC is automatically
turned
On
when a cycle is selected.
(See "Preset Cycle Settings"
in "Cycles.")
ATC is available
with Warm/Warm,
Warm/Cold
and Cool/Cold
settings. The water
temperature
in the Hot/Cold
and Cold/Cold
settings depend
on the water temperature
at the
water
inlet faucets.
ATC ensures consistent
cleaning.
Heated
water consumes
the largest amount
of energy
that a washer
uses.
lbday's
detergents
work well at temperatures
above 60°F (15.6°C).
Delay
Wash
You can use the Delay Wash feature to delay the start of a wash cycle for up to 10 hours
(depending
on your
model).
load
the washer
and fill the dispensers.
Close the washer
lid.
1.
2.
3.
4.
5.
Press POWER.
Select the desired
Cycle,
Modifiers
and Options.
Press DEI.AY WASH.
1H (one hour) will be displayed
in the time display window.
The
indicator
light for Delay Wash will glow.
@
6.
For a longer
delay time, press DELAY WASH.
The Start time will increase
by 1-hour
steps.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido