Descargar Imprimir esta página

SEVERIN KS 9879 Instrucciones De Uso página 11

Vinoteca con regulación de la temperatura

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
This appliance is designed for storing bottled beverages only.
Do not lean or put undue weight on the shelves, door etc.
Protect the inside of the unit at all times from open flames and any other sources of ignition.
Remove the plug from the wall socket
-
in case of any malfunction,
-
before de-frosting
-
during cleaning.
This appliance is not intended for use by any person (including children) with reduced physical,
sensory or mental capabilities, or lacking experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
Children must be supervised to ensure that they do not play with the appliance.
In order to comply with safety regulations and to avoid hazards, any repairs or modifications to
this unit must be carried out by our authorised service personnel, including the replacement of
the power cord.
We reserve the right to introduce technical modifications.
If the unit is not going to be used for an extended period of time, we recommend keeping the
door open.
If the unit is sold, handed over to a third party or disposed of at a suitable recycling facility,
attention must be drawn to the presence of the insulation agent 'cyclopenthane' as well as the
refrigerant R 600.
Familiarisation
1. Control panel with temperature
display
2. LED interior lighting
3. Storage racks
4. Door
5. Adjustable feet (left and right)
Before using for the first time
Remove any exterior and interior packaging materials completely.
Caution:
Keep any packaging materials well away from children, as they are a potential source
of danger e.g. from suffocation.
Before it is connected to the mains, the unit must be thoroughly checked for transport damage,
including its power cord.
Clean the unit according to the instructions given in the
To ensure proper functioning, wait for about 2 hours before connecting the unit and switching it
on after it has been positioned.
When the unit is first switched on, a slight 'new' smell may be noticed. However, this will
disappear once the cooling process has begun.
1
2
3
4
5
De-frosting and cleaning section.
11

Publicidad

loading