Emission Levels; Intended Use; Technical Data; Machine Features - Festool HKC 55 EB Manual De Instrucciones

– Connect the machine to a suitable dust extractor.
– Regularly remove dust deposits from the motor
housing.
– Use an aluminium saw blade.
– Close the viewing window/chipguard.
Wear protective goggles.
– When sawing panels, they must be lubricated
with paraffin but thin-walled profiles (up to 3
mm) can be sawed without lubrication.
2.5

Emission levels

Levels determined in accordance with EN 60745 are
typically:
Sound pressure level
Noise level
Measuring uncertainty allow-
ance
CAUTION
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level (3 directions)
Cutting wood
Cutting metal
Uncertainty
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3

Intended use

Cordless circular saws are suitable for sawing
– wooden materials and wood-based materials,
– plaster- and cement-bonded fibres,
– plastic materials,
– aluminium (only with a special saw blade for alu-
minium offered by Festool)
L = 79 dB(A)
PA
L = 90 dB(A)
WA
K = 3 dB
(vector sum for three
h
a < 2,5 m/s
h
a = 3,0 m/s
h
K = 3 m/s
Only saw blades with the following specifications
can be used: saw blade diameter 160 mm; recom-
mended cutting width 1,8 mm, max. 2.2 mm with
restricted function of guide wedge; locating bore
20 mm; recommended steel blade thickness
1,5 mm, max. 1.8 mm; suitable for speeds up to
-1
6800 min . Never use sanding discs in the ma-
chine.
The machine is designed and approved for use by
trained persons or specialists only.
The user is liable for improper or non-in-
tended use.
4

Technical data

Cordless circular saw
Motor voltage
No-load speed
Inclination
Cutting depth at 0°
Cutting depth at 50°
Saw blade dimensions
recommended
Weight without battery pack
5

Machine features

[1-1] Handles
[1-2] Switch-on lock
2 [1-3] Lever for changing blades
2
[1-4] Retractor lever for pendulum guard
2 [1-5] Guide wedge
[1-6] Pendulum guard
[1-7] On/Off switch
[1-8] Lever for plunge function
[1-9] Split scale for cutting depth stop (with/
without guide rail)
[1-10] Extractor connector
[1-11] Angle scale
[1-12] Knob for angle setting
[1-13] Cutting depth adjuster
[1-14] Battery pack
[1-15] Adjustable jaws
[1-16] Capacity display
[1-17] Insulated gripping surfaces (grey shaded
area)
HKC 55 EB
HKC 55 EB
14,4 - 18 V
4500 min
0° to 50°
0 - 55
38 mm
160 x 1,8 x 20 mm
max. 160 x 2,2 x 20 mm
GB
-1
3,4
19