Before Starting Work; Preparing The Backpack Battery For Operation; Charging The Backpack Battery; Setting Up The Charger - Stihl AR 2000 L Manual De Instrucciones

English
￭ Use of parts that are not authorized or approved by STIHL
may cause serious or fatal injury or property damage.
– STIHL recommends that only identical STIHL
replacement parts be used for repair or
maintenance.
￭ To reduce the risk of electric shock when charging:
– Unplug the charger from the electrical outlet before
inspecting or cleaning the charger.
– Regularly check the electrical contacts of the
charger and ensure that the insulation of the power
cord and plug are in good condition and show no
signs of aging (brittleness), wear or damage.
– Have a damaged power supply cord or AP Adapter
replaced by an authorized STIHL servicing dealer.
￭ To reduce the risk of short circuit and fire:
– Keep the charger and the AP Adapter free of foreign
matter. Clean as necessary with a dry cloth or soft,
dry brush.
￭ Improper storage can result in unauthorized use and
damage, which can increase the risk of fire, electric shock
and other personal injury or property damage. Before
storing:
– Remove the connecting cord from the power tool or
AP Adapter.
– Remove the AP Adapter from the power tool or
charger.
– Store the battery, battery harness, connecting cord
and AP Adapter indoors in a dry, secure place that
cannot be accessed by children or other
unauthorized users.
– Never store the battery, connecting cord or
AP Adapter in damp or corrosive environments or in
conditions that could lead to the corrosion of metal
components.
– Never store the battery plugged into the AP Adapter
or power tool.
– Never store the battery in a metal container or in a
container with metal objects (e.g., paper clips, nails,
coins, keys).
10

7 Before Starting Work

7.1

Preparing the Backpack Battery for Operation

Before starting work:
► Check the battery status, @ 9.1.
► Fully charge the battery, @ 8.
► Clean the battery, @ 19.
► If the connecting cord is used:
► Clean the contact surfaces on the connecting cord,
@ 19.2.
► Position the connecting cord, @ 12.2.

8 Charging the Backpack Battery

8.1

Setting up the Charger

WARNING
Read and follow the safety precautions on the battery and
charger and the warnings and instructions in this manual,
@ 5.2, and in the charger's manual. To reduce the risk of
short circuit, which could lead to electric shock, fire and
explosion, make sure the charger and its components are
dry and not damaged; operate the charger indoors at an
appropriate ambient temperature.
WARNING
A typical household electric circuit is between 15 and 20
amps. A single STIHL AL 500 charger draws approximately
4.8 amps. A single AL 300 charger draws approximately
4.4 amps. To reduce the risk of fire from overloading an
electrical circuit:
► Ensure the electrical system is rated to withstand the
expected electrical draw before charging your battery.
► Charge multiple batteries one at a time or on separate
circuits, unless you know your circuit can handle the total
expected draw from multiple chargers.
7 Before Starting Work
0458-820-8621-A