Positioning The Connecting Cord - Stihl AR 2000 L Manual De Instrucciones

12 Adjusting the Backpack Battery
2
4
► Line up mark (3) with mark (4).
► Insert the slide (2).
► Pull the slide (2) up (in opposite direction to arrow).
The slide (2) will engage with a click.
► Adjust the slide (2) at the left and right shoulder straps to
the same position.

12.2 Positioning the Connecting Cord

WARNING
To reduce the risk of injury from tripping on the connecting
cord or losing control of the power tool, always secure the
connecting cord with the hook and eye fasteners as
described below. Always position and secure the connecting
cord so that it will not interfere with the proper working
technique as described in the instruction manual for the
power tool you are using or your ability to maintain control of
the power tool.
The connecting cord can be secured in different positions
and adjusted to suit the height and reach of the operator.
0458-820-8621-A
2
2
3
1
2
2
The connecting cord can run through the guide (1) on the
shoulder strap (Illustration A), or along the back
plate (Illustration B). Secure the connecting cord to the
harness with the hook and eye fasteners (2). Always secure
the connecting cord using the guide or hook and eye
fasteners on the side of the body on which the power tool is
held and controlled. Do not allow the connecting cord to
swing across your body or hang at your side.
C
The length of the connecting cord can be adjusted by
making a loop around the top (Illustration C) or on the side
(Illustration D) of the backpack battery with the hook and eye
fasteners.
English
A
2
2
D
B
15