After Finishing Work; Preparing For Transportation Or Storage; Usb Port; Charging A Usb Device - Stihl AR 2000 L Manual De Instrucciones

15 After Finishing Work

15 After Finishing Work

15.1 Preparing for Transportation or Storage

To prepare the battery for transportation or storage:
► Switch off the power tool as described in its instruction
manual.
► Disconnect the battery, @ 13.4.
► If the battery, battery harness, connecting cord or
AP Adapter become wet during operation, allow them to
dry separately and completely before charging or storing.

16 USB Port

16.1 Charging a USB Device

To charge a USB device with the battery:
1
► Pull out the dust cap (1).
► Insert the USB plug in the battery's USB port (3).
► Press the button (4) on the battery.
► Remove any USB device connected to the USB charging
port and insert the dust cap (1) in the USB port (3) before
attempting to operate the battery.
0458-820-8621-A

17 Transporting

17.1 Backpack Battery

To reduce the risk of a short circuit, which could lead to
electric shock, fire and explosion, never transport the battery
in a metal container or near metal objects (e.g., paper clips,
nails, coins, keys), @ 5.2.
When transporting an undamaged and properly functioning
battery:
► Disconnect the battery from the power tool.
4
3
► Carry the battery on your back or by the handle.
2
► Never transport the backpack battery in a metal or other
container that is capable of conducting electricity, or near
metal objects (e.g., paper clips, nails, coins, keys).
► If you are placing the battery in a container or transporting
it in a vehicle, secure it and its container against turnover,
impact and damage.
► Never sit or stand on the battery. Never place objects on
the battery or stack batteries on top of one another.
Special precautions must be taken when transporting a
damaged or malfunctioning battery. To reduce the risk of
accidents, always contact your STIHL servicing dealer
before transporting such a battery.
WARNING
WARNING
English
19