Setting procedure:
• Press the
FB
Select
ars on the display.
Standby
• Select the „Standby" menu option by pressing the
ML
and
Set
highlighted.
• Confirm the selection of the special function by pres-
Standby
sing the
10 min
• Select the desired setting with the
keys. The setting takes effect immediately.
Set
- When „Standby 10min" is displayed, the Auto OFF function will be
activated after 10 minutes.
- When „Standby 1 min" is displayed, the Auto OFF function will be
activated after 1 minute.
- When „Standby OFF" is displayed, the Auto OFF function is deactivated.
• Press the button
repeatedly until the screen is reset to its normal state. If the
button
is not pressed, the display is automatically reset to its normal state
after about 5 seconds.
button repeatedly until „Select" appe-
Sel
keys. The selected menu option will be
button.
Set
and
7.12 KEYLOCK
The KEYLOCK function enables the user to lock the buttons on the flash unit to
prevent them from inadvertently being pressed. When the KEYLOCK function is
activated, a symbol
appears on the display above three buttons.
Activating the KEYLOCK function:
Sel
• Press the
button repeatedly until „Select"
appears on the display.
• Select the menu option „KEYLOCK" by pressing the
and
buttons. The selected menu option will
be highlighted.
• Confirm the selection of the special function by pres-
sing the
Set
button.
• Using the
and
keys, select the menu item
"KEYLOCK? YES" and confirm the settings by pres-
sing the
button.
Set
The keypad lock is activated and the screen immedia-
tely switches back to normal display.
A corresponding symbol
is displayed
to indicate that the buttons are locked.
Deactivating the KEYLOCK function
When a button is pressed, „UNLOCK Press these keys" is displayed. To deactivate
the Key-Lock function, press both middle buttons for about 3 seconds. The display
is reset to its normal state when the KEYLOCK function is deactivated.
ML
Select
KEYLOCK
Zoom Ext
Set
KEYLOCK?
YES
Set
F 5.6
TTL
AZoom 35
12 m
133