baltur TBL 85P Manual De Instrucciones De Uso página 20

ELECTRODES/IONISATION PROBE
ADJUSTMENT DIAGRAM
SF II 85P - 85P
DACA
SF II 105P - 105P
DACA
SF II 130P - 130P
DACA
SF II 160P - 160P
DACA
12 ÷ 12,5 29
SF II 210P
After having installed the nozzle, check the correct position of the
electrodes and disk according to the following levels. It's adviseable
to check levels after every intervention on head.
To prevent damage to the support effect nozzle assembly/
!
disassembly tasks with the aid of a wrench and counter-
wrench.
The use of an ionisation angle of 45° may significantly
!
improve combustion values with certain applications (e.g.
narrow combustion chambers).
A B C D
2 ÷ 2,5 19 5 2 ÷ 3 7,5 ÷ 8,5
2 ÷ 2,5 19 5 2 ÷ 3 7,5 ÷ 8,5
2 ÷ 2,5 19 5 2 ÷ 3 7,5 ÷ 8,5
2 ÷ 2,5 19 5 2 ÷ 3 7,5 ÷ 8,5
15 2 ÷ 3 7,5 ÷ 8,5
0006081325_201409
E
Legend:
1- Diffuser
2- Deflector disk
3- Nozzle holder
4- Ignition electrodes
5- Nozzle
RECOMENDED NOZZLES
MONAMRCH tipo PLP 60° (TBL 85P)
MONARCH tipo PLP 60° (TBL 105P)
MONARCH tipo PLP 60° (TBL 130P)
STEINEN tipo SS 45° (TBL 160P)
STEINEN tipo SS 45° (TBL 210P)
18 / 30