Selecting An Input Source; Adjusting The Recording Level - Yamaha CDR-HD1000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 332
9.
Perform finalization when all recordings have been
completed.
See page 19 for the finalization procedure.
IMPORTANT
• Never turn off the power of this unit during recording.
Recording may not be correctly made, or the CD-R or CD-RW
disc may be damaged.
• If the power of this unit is turned off during recording on a
CD-R disc, recording may become impossible or the CD-R
disc may not be played back normally because information is
not written in the PMA (Program Memory Area).
• During recording, make sure that this unit is not subjected to
shock or vibration as it may cause skips or jumps to be
included in the recording.

Selecting an Input Source

Press INPUT to select the appropriate input source to be used for
recording from among OPTICAL (optical digital input),
COAXIAL (coaxial digital input), and ANALOG (analog input).
• Press INPUT to light OPTICAL when recording the source input
to the DIGITAL IN (OPTICAL) jack.
• Press INPUT to light COAXIAL when recording the source input
to the DIGITAL IN (COAXIAL) jack.
• Press INPUT to light ANALOG when recording the source input
to the ANALOG LINE IN (REC) jacks.
ER
CDR–HD1000
COPY
OPEN/CLOSE
COPY
FINALIZE
ERASE
TEXT/TIME
MODE/SET
COMPLETE
CLEAR
Note
• This selection of the input source must be made while this unit is
in the recording pause mode.
MULTI JOG
PUSH ENTER
TEXT/TIME
MODE/SET
MENU
TRACK NO.
COMPLETE
CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
MIN
MAX
INPUT
REC
TRACK NO.
WRITE
INPUT
INPUT
MENU
ENTER
BASIC RECORDING OPERATION

Adjusting the Recording Level

There is an adjusting procedure for each input source to be recorded
as explained below. Choose the one for your input source and
follow the steps.
I When recording a digital input source
ER
CDR–HD1000
COPY
OPEN/CLOSE
COPY
FINALIZE
TEXT/TIME
MODE/SET
COMPLETE
CLEAR
1
ABC
4
JKL
7
STU
0
SPACE
REPEAT
The digital recording level is set to 0dB, the level of the input
source, as an initial setting. Further adjustment is not normally
necessary. However it is possible to adjust the recording level to suit
your needs.
1.
Press MENU while this unit is in the recording pause
mode.
The following message appears on the display.
L e v e l
2.
Play the loudest passage (highest sound level) of the
source to be recorded.
3, 4
1
MULTI JOG
PUSH ENTER
TEXT/TIME
MODE/SET
MENU
TRACK NO.
COMPLETE
CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT
ANALOG REC LEVEL
REC
FINALIZE
ERASE
OPTICAL
COAXIAL
ANALOG
MIN
MAX
REC
TRACK NO.
ERASE
WRITE
INPUT
MENU
1
3
ENTER
4
2
DEF
3
GHI
5 MNO
6 PQR
8 VWX
9
YZ
+
10
SYMBOL
BOOKMARK
RANDOM
INTRO
0 . 0 d B
REC
LEVEL
L
dB
–30 –10
–6
–2
0
R
E-
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido