Yamaha CDR-HD1000 Manual De Instrucciones página 40

TRACK EDITING
Track Rename
You can move a track and assign a new number.
1.
Select and confirm "Track Rename" in step 5 for
"TRACK EDITING" on page 37.
The following message appears on the display.
Disc that contains the track to be moved
R e n a m e 0 0 1 1 ?
The disc number that contains the track to be moved flashes.
2.
Select the disc that contains the track to be moved by
rotating the MULTI JOG knob (pressing +/– on the
remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
be moved.
The number of the track to be moved flashes.
4.
Select the track to be moved by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to be moved.
The display scrolls to the left to indicate the disc number that
contains the track to be moved, the existing track number, and
the new track number.
Disc that contains the track to be moved
0 0 1 1 ≥
Existing track number
6.
Select the new track number by rotating the MULTI
JOG knob (pressing +/– on the remote control).
7.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the new track number.
Note
• If a wrong selection is confirmed, press CLEAR to cancel it.
Then, select again and confirm the correct entry.
8.
Press COMPLETE.
The selected track is renumbered.
Notes
• If the selected new track number is already in use, the tracks
following this renumbered track will be automatically up-
numbered by one. However, if there is any unused track number,
only the tracks up to that number will be up-numbered.
• The original number of the track that has been renumbered will be
available for future use.
38
E-
L
GROUP
dB –30 –10 –6 –2 0
R
Track to be moved
1
TRACK
L
dB –30 –10 –6 –2 0
R
New track number
Track Adjust
You can change the beginning of the track to either earlier or later.
1.
Select and confirm "Track Adjust" in step 5 for
"TRACK EDITING" on page 37.
The following message appears on the display.
Disc that contains the track to be adjusted
A d j u s t 0 0 1 2 ?
The disc number that contains the track to be adjusted flashes.
2.
Select the disc that contains the track to be adjusted
by rotating the MULTI JOG knob (pressing +/– on the
remote control).
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
be adjusted.
The number of the track to be adjusted flashes.
4.
Select the track to be adjusted by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to be adjusted.
Note
• If there is no track before the track that is selected and
confirmed in steps 4 and 5, "No Previous" appears on the
display, and adjustment is not possible for this track.
N o P r e v i o u s
6.
Press w/d (w on the remote control) to start playback
of the track to be adjusted.
"Adjust" and the indication of the time length to be adjusted
alternately appear on the display.
A d j u s t
+ 0 : 0 0 : 0 0
L GROUP
dB –30 –10 –6 –2 0
R
Track to be adjusted
TRACK
L
dB –30 –10 –6 –2 0
R
0 0 1
L
dB
R
L
dB
R
Cursor