Remote Control - Yamaha CDR-HD1000 Manual De Instrucciones

Remote Control

Cautions
• If operation of this unit by the remote control creates any malfunction in any other components, change the placement of the component.
• Do not spill any liquid on or drop the remote control. Do not place it near a heater or in the bathroom where the temperature and humidity
become high.
• Make sure the remote control sensor is not exposed to direct sunlight or strong lights. If it is, it may not function correctly.
I Loading the batteries in the remote control
1.
Remove the battery compartment cover on the back
of the remote control.
2.
Insert 2 batteries (AA, UM-3 or R6 type) according to
the polarity markings on the inside of the battery
compartment.
3.
Close the cover until it snaps into place.
1
3
I Battery replacement
If you find that the remote control must be used closer to this unit
than usual, the batteries are weak. Replace both batteries with new
ones.
I Notes on batteries
• Use only AA, UM-3, or R6 type batteries for replacement.
• Do not mix a new battery with a used one.
• A rechargeable battery cannot be used.
• Do not mix different types of battery.
• Do not attempt to short out the batteries by directly connecting the
plus (+) and the minus (–) with a piece of metal.
• Remove the batteries if the remote control will not be used for an
extended period of time.
• If batteries leak, dispose of them immediately. Clean the battery
compartment thoroughly before installing new batteries.
2
I Remote control operation range
NATURAL SOUND HDD/CD RECORDER CDR–HD1000
POWER
HDD CDR COPY
PHONES LEVEL
MIN MAX
Remote control sensor
PREPARATION
MULTI JOG
PUSH ENTER
TEXT/TIME MODE/SET MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
Within 6m (20')
5
E-