Husqvarna P 520D Manual De Usuario página 25

Maintenance
Do a check of the parking brake
Adjust the parking brake
Do a check of the lamps, replace broken lamps
Lubricate according to the lubrication overview
Lubricate the blade shafts
Lubricate the front and rear bearings of the lift arms
Lubricate the pivot wheel bearings
Lubricate the drive shaft
Lubricate the throttle cable
Lubricate the wheel axles splines
Examine and adjust the wheel nuts
Make sure that the tire pressure is correct
Replace the blades
Replace the engine oil
1
Replace the oil filter
Replace the oil in the angle gear
Replace the hydraulic oil
Replace the hydraulic oil filter
Replace the air filter
Replace the fuel filter
Do a check of the parallelism of the cutting deck
Replace the generator belt
Replace the PTO belts
Replace the coolant
Examine the battery
Make sure that the muffler is attached correctly and not dam-
aged
Replace the engine cushions and the gear cushions
Do a check of/adjust front and rear wheel speed
Do a check of the oil level in the bevel gear
Replace the oil in the bevel gear
Replace the oil in the transmissions
1
Replace first time after 25 hours. For heavy load operation or at high ambient temperatures, replace every 50
hours.
740 - 004 -
1
Daily Weekly
X
X
X
X
X
X
X
X
X
*
Maintenance interval in
hours
25 100 200 400 800
* *
X X
X X
X X
X
* *
X X
X X
X
X
*
*
*
X
X
X X
*
*
X X
* *
* *
X X
*
* *
*
*
25