To Replace A Broken Lamp - Husqvarna P 520D Manual De Usuario

To remove the right side cover
1. Remove the 3 screws and remove the side cover.
To remove the service hatch
1. Remove the 2 screws and lift off the service hatch.
To remove the cover plate
1. Remove the 3 screws and remove the cover plate.
740 - 004 -
To remove the transmission cover
1. Remove the 4 screws.
2. Lift and remove the transmission cover.

To replace a broken lamp

1. Remove the 2 screws, one on each side, and
remove the cover.
2. Disconnect the cables at the connection (A).
A
27