Safety Instructions For This Appliance - Bosch MCM21 Serie Instrucciones De Uso

en
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Before replacing accessories or additional parts, which move during
operation, switch off the appliance and disconnect from the power
supply.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.

, Safety instructions for this appliance

Risk of injury
Electric shock risk
If the power is interrupted, the appliance remains switched on and
restarts when the power is restored.
Change accessories and tools only when the appliance is at a stand-
still (rotary switch on 0/off) and the mains plug has been pulled out.
Never immerse the base unit in liquids or place under running water
and do not clean in the dishwasher.
Before rectifying a fault, pull out the mains plug.
Risk of injury from the rotating tools!
When operating the appliance, never place fingers in the bowl (even
when the appliance has been switched off, the drive continues rotating
briefly).
Change tools only when the drive is at a standstill.
Do not operate the appliance without the drive cover (blender drive).
Risk of injury from sharp blades!
Grip the chopping blade by the plastic handle only (top end).
Grip the cutting discs by the plastic handle only.
Risk of injury from sharp blender blades/rotating drive!
NEVER put fingers in the attached blender.
Before operating the appliance, always attach the lid.
Attach/replace the blender only when the appliance is at a standstill.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.4 litres of hot liquid.
Robert Bosch Hausgeräte GmbH 13