To Examine The Air Filter; To Replace The Air Filter - Husqvarna K1270 II R Manual De Usuario

Ocultar thumbs Ver también para K1270 II R:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
tank is filled. The fuel filter must be replaced yearly or
more frequently if it is clogged.
CAUTION: Do not clean the fuel filter.

To examine the air filter

CAUTION: Be careful when you remove the
air filter. Particles that fall into the carburetor
inlet can cause damage.
Examine the air filter if the engine power decreases.
1. Loosen the 3 screws on the air filter cover.
2. Remove the air filter cover.
3. Examine the air filter.
4. If it is necessary, replace the air filter. Refer to
replace the air filter on page 18 .
5. Replace the air filter cover.
6. Tighten the 3 screws.

To replace the air filter

CAUTION: Do not clean the air filter with
compressed air. The air filter is made of
paper and is easily damaged.
18
WARNING: Use approved respiratory
protection when you clean or replace the air
filter. Discard used air filters correctly. The
dust in the air filter is dangerous to your
health.
Note: Replace the air filter only when it is damaged.
1. Loosen the 3 screws on the air filter cover.
2. Remove the air filter cover.
3. Loosen the screw on the air filter housing and
remove it.
4. Remove the air filter.
5. Install the new air filter.
6. Replace the air filter housing.
To
7. Tighten the screw on the air filter housing.
8. Replace the air filter cover.
9. Tighten the 3 screws.
1390 - 001 - 10.01.2020

Publicidad

Tabla de contenido
loading

Tabla de contenido